Product ID:MG463 AND MG482,GEAR OIL 80W90 & 85W 140
MSDS Date:01/01/1987
FSC:9150
NIIN:01-035-5396
MSDS Number: BGGPX

Emergency Phone: (201)591-9400

Cage: 58563

Telephone: 732-591-8825

Cage: 58563

LUBRICATING OIL (GEAR) (USE TLV A OIL MIST)

Fraction By Weight: 100%

ACGIH TLV: 5MG/CUM

Effects of Overexposure:INHAL:NAUSEA,DIZZINESS,VOMITING,MAY CAUSE
IRRITATION TO EYES,SKIN AND RESPIRATORY TRACT.USE WITH CAR

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:445F/229C(C.O.C)
Lower Limits:U/K
Upper Limits:U/K
Extinguishing Media:CO*2,WATER FOG,FOAM OR DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA FOR FIRES AND IN
CONFINED AREA
Unusual Fire/Explosion Hazard:NONE SPECIFIED.BREATHING MAY CAUSE
NAUSEA,DIZZINESS,VOMITING.

Spill Release Procedures:USE PROPER PERSONAL PROTECTION.RECOVER SPILLED
MATERIAL.USE ABSORBENT MATERIALS AND COLLECT FOR PROPER DISPOSAL.

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA.KEEP AWAY FROM OPEN FLAMES,HEAT.KEEP CONTAINER CLOSED WHEN NOT
IN USE.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN.DO NOT BREATHE
VAPORS.

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED

HCC:V6
Boiling Pt:B.P. Text:>600F/316C
Vapor Pres:1.0
Vapor Density:<1.0
Spec Gravity:<1.0
Evaporation Rate & Reference:<1.0 (BUTYL ACET=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER,PROPANE ODOR
Percent Volatiles by Volume:0.0

Stability Indicator/Materials to Avoid:YES
ACIDS,ALKALIS,STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:OXIDES OF SULFUR & NITROGEN,CO AND/OR
CO*2 ON BURNING.
Conditions to Avoid Polymerization:OPEN FLAMES

Waste Disposal Methods:DISPOSE OF THE COLLECTED MATERIAL IN ACCORDANCE
WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.